Using makerbot, I built a fully enclosed industrial-grade 3D printer
Модератор: Kaktus
Using makerbot, I built a fully enclosed industrial-grade 3D printer
Все хорошо, я профессиональный инженер-распечатка, и мы с моей командой прошли целый месяц, и мы разработали полностью закрытую промышленную систему 3D-принтера. Эта машина напечатанная в размере 200*200*200 мм, с распечатанной скоростью, которая может достигаться в 150mm/s, и распечатка на 0,05 мм до 0,4 мм, и распечатка может быть под контролем около 0,1 мм. Можно распечатываться множеством материалов, таких, как пла, абс, углеродное волокно, криогенные и металлические материалы (40% медных материалов) и т.д. Отпечатки пальцев очень хороши, и они показывают некоторые из них, которые мы печатаем.
Будем надеяться, что все будут общаться со мной.
My native language is not Russian but English.
Будем надеяться, что все будут общаться со мной.
My native language is not Russian but English.
- Lenivo
- Сообщения: 1808
- Зарегистрирован: 25 май 2017, 12:46
- Имя: Александр
- Благодарил (а): 92 раза
- Поблагодарили: 179 раз
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
И это чего такое?
Конечно, приятно иностранцев видеть на этом форуме. Но Форум то, русскоязычный и здесь тусуется множество специалистов, которые в одиночку и с командой потратили своего квалифицированного времени гораздо больше месяца на свои принтеры.
Только я не понял из поста, чего человек хочет от сообщества форума. Понял, что построил с командой принтер за месяц. Также человек выложил образцы печати, и чего то там кусочки изображений принтера и чего? Чего нужно-то?
Конечно, приятно иностранцев видеть на этом форуме. Но Форум то, русскоязычный и здесь тусуется множество специалистов, которые в одиночку и с командой потратили своего квалифицированного времени гораздо больше месяца на свои принтеры.
Только я не понял из поста, чего человек хочет от сообщества форума. Понял, что построил с командой принтер за месяц. Также человек выложил образцы печати, и чего то там кусочки изображений принтера и чего? Чего нужно-то?
- 3D-SPrinter
- Сообщения: 10515
- Зарегистрирован: 19 ноя 2015, 14:23
- Имя: Андрей
- Откуда: Н.Новгород
- Благодарил (а): 76 раз
- Поблагодарили: 980 раз
- Контактная информация:
- Alex Post
- Сообщения: 6993
- Зарегистрирован: 11 янв 2017, 17:22
- Имя: Александр
- Откуда: Брест, РБ
- Благодарил (а): 330 раз
- Поблагодарили: 817 раз
- Контактная информация:
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
Ну злые вы Человеку охота поделиться своим детищем - пусть делится Кстати, я первое его сообщение не пропустил, думал что бот какой то. Но нет, живой человек А вдруг кому то приглянется это "индустриальное решение" и решит себе купить.
P.S. Распечатки отличные, кстати.
P.S. Распечатки отличные, кстати.
Prusa i3 rework - трудится с 2015 года
Черно-оранжевый 3D-SPrinter 232 - https://3deshnik.ru/forum/viewtopic.php?f=21&t=393
Черно-оранжевый 3D-SPrinter 232 - https://3deshnik.ru/forum/viewtopic.php?f=21&t=393
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
No, it's not an AD, I'm just sharing my results
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
I hope you can communicate and discuss the technology of 3D printing together
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
A friend said that he did not see the machine, I share some pictures about the machine。It is printing a moon lamp now, we will have Mid-Autumn festival in two days.The Mid-Autumn festival is a relatively important festival for us. Our company needs a three-day holiday, and then many people will go home to have dinner together. Then they need to give mooncakes to their relatives and friends.In these two days, our moon will be round. We can sit and talk, drink tea, eat moon cakes and enjoy the moon.So a lot of my friends wanted moon lights during this time, and I'm printing them now, and I'll give them to them later.
- Alex Post
- Сообщения: 6993
- Зарегистрирован: 11 янв 2017, 17:22
- Имя: Александр
- Откуда: Брест, РБ
- Благодарил (а): 330 раз
- Поблагодарили: 817 раз
- Контактная информация:
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
I see that you are from China? This printer can be bought somewhere, for example at Aliexpress? Or is it a single prototype?
In any case, it's interesting to find out what's inside. What is this screen? What electronics are used for control? The camera simply closes the door or has the means for thermal control?
In any case, it's interesting to find out what's inside. What is this screen? What electronics are used for control? The camera simply closes the door or has the means for thermal control?
Prusa i3 rework - трудится с 2015 года
Черно-оранжевый 3D-SPrinter 232 - https://3deshnik.ru/forum/viewtopic.php?f=21&t=393
Черно-оранжевый 3D-SPrinter 232 - https://3deshnik.ru/forum/viewtopic.php?f=21&t=393
- 3D-SPrinter
- Сообщения: 10515
- Зарегистрирован: 19 ноя 2015, 14:23
- Имя: Андрей
- Откуда: Н.Новгород
- Благодарил (а): 76 раз
- Поблагодарили: 980 раз
- Контактная информация:
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
Думаю, с самой технологией FDM 3д-печати и так всё ясно. Остаются вопросы по технологичности и оптимальности технических решений при строительстве самих принтеров. Например, интересно по какой технологии и из каких материалов изготовлен корпус вашего принтера.
I think with the technology itself FDM 3d printing and so everything is clear. There remain questions about the processability and optimality of technical solutions for the construction of printers themselves. For example, it is interesting for what technology and what materials the body of your printer is made of.
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
The shell of the machine adopts integral sheet metal without special screw to avoid printing error and improve printing accuracy. If the shell needs to assemble multiple panels, the more the assembly, the greater the error of the model. But my printer perfectly avoids this drawback, and the case is integral, which improves accuracy.Alex Post писал(а): ↑22 сен 2018, 10:00I see that you are from China? This printer can be bought somewhere, for example at Aliexpress? Or is it a single prototype?
In any case, it's interesting to find out what's inside. What is this screen? What electronics are used for control? The camera simply closes the door or has the means for thermal control?
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
The screen is full touch screen, which can be converted into English or Russian according to your request. And the machine is fully enclosed with a heating bed, which ensures the temperature inside the machine, so that more kinds of materials can be printed, such as ABS, low temperature nylon, carbon fiber and so on. Like other i3 printers, these materials cannot be printed perfectly.Alex Post писал(а): ↑22 сен 2018, 10:00I see that you are from China? This printer can be bought somewhere, for example at Aliexpress? Or is it a single prototype?
In any case, it's interesting to find out what's inside. What is this screen? What electronics are used for control? The camera simply closes the door or has the means for thermal control?
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
My printer adopts FDM printing technology, the structure is makerbot, the body is made of integral sheet metal, and the optical axis is m8 and m10. The highest printing precision is 0.05mm, and the usual printing precision is 0.1mm.3D-SPrinter писал(а): ↑22 сен 2018, 10:28Думаю, с самой технологией FDM 3д-печати и так всё ясно. Остаются вопросы по технологичности и оптимальности технических решений при строительстве самих принтеров. Например, интересно по какой технологии и из каких материалов изготовлен корпус вашего принтера.
I think with the technology itself FDM 3d printing and so everything is clear. There remain questions about the processability and optimality of technical solutions for the construction of printers themselves. For example, it is interesting for what technology and what materials the body of your printer is made of.
- 3D-SPrinter
- Сообщения: 10515
- Зарегистрирован: 19 ноя 2015, 14:23
- Имя: Андрей
- Откуда: Н.Новгород
- Благодарил (а): 76 раз
- Поблагодарили: 980 раз
- Контактная информация:
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
Я так и думал, что корпус нарезан и загнут из листового металла. У нас тоже выпускается много подобных принтеров http://www.zenit3d.ru/ , http://imprinta.ru/hercules и т.д. Но для DIY это далеко не оптимальная технология. Точность позиционирования не очень важна, потому что она у всех принтеров примерно одинаковая. Но на качество печати влияет много других факторов.
Re: Using makerbot, I built a fully enclosed industrial-grade 3D printer
You can buy it on aliexpress,https://ru.aliexpress.com/item/maquina- ... 53fetfcXU9Alex Post писал(а): ↑22 сен 2018, 10:00I see that you are from China? This printer can be bought somewhere, for example at Aliexpress? Or is it a single prototype?
In any case, it's interesting to find out what's inside. What is this screen? What electronics are used for control? The camera simply closes the door or has the means for thermal control?